Types of Drills (Chuck capacity)
I just wanted to let you know that David was absolutely wonderful. He is so knowledgeable and a very good work ethic. His efforts are very much appreciated.
Rahul Pandya
Thank you so much for the great service I received when dealing with Virabh Electricals. The entire process was smooth from start to finish.
Pankaj Patel
Downloads
Drills
With drilling capacity from 6mm (1/4”) to 50mm (2”), various speeds and power, our drills are designed to handle both your tough and smooth operations.
The main principle of the drill is that a special nozzle (drill) makes rotational movements and penetrates the surface of the material, as a result we obtain the required hole.
Most drills used today are powered, and use a chuck to grip the bits of the drills. The drill bit is gripped by a chuck at one end of the drill and rotated while pressed against the target material. The tip of the drill bit does the work of cutting into the target material, either slicing off thin shavings, grinding off small particles, or crushing and removing pieces of a work piece.
The range provides straight, angle and pistol drills.
Specification
-
Battery-Powered
-
Multiple Clutch Settings
-
Multiple Speed Settings
-
Second Handle
1/4" (Chuck capacity)
- Vibration :-
2.5 m/s² / 3.1 m/s²
- Free Speed :-
2400 rpm / 4500 rpm
3/8" (Chuck capacity)
- Vibration :-
1.3 m/s² / 3.6 m/s²
- Free Speed :-
500 rpm / 6000 rpm
1/2" (Chuck capacity)
- Vibration :-
2.5 m/s² / 3.7 m/s²
- Free Speed :-
500 rpm / 900 rpm
7/8" (Chuck capacity)
- Vibration :-
2.5 m/s² / 3.8 m/s²
- Free Speed :-
430 rpm / 480 rpm
1 1/4" (Chuck capacity)
- Vibration :-
2.5 m/s² / 2,5 m/s²
- Free Speed :-
350 rpm / 380 rpm
